T grid ceiling roll forming machine

T grid ceiling roll forming machine

 T grid ceiling roll forming machine is a type of roll forming machine specifically designed for the production of T-grid style ceilings, which are commonly used in modern architectural design for their aesthetic appeal and practicality. These machines are used to create various profiles of metal sheets, such as purlins, floor decks, and roof sheets, typically for the construction industry.Our company specializes in the production of all kinds of cold forming equipment, in addition to T grid ceiling roll forming machine, there are roof sheet machine and purlin making machine. The following is some introduction of our company T ceiling keel machine.

Design Idea：

High speed:0-25 m per minute 

Profile drawing for reference:

Main tee:38x24x3600 mm

Long cross tee:28x24x1200 mm

Short cross tee:28x24x600 mm

Wall angle:22x22x3000 mm

Processing Flow of T grid ceiling roll forming machine

Uncoiling---Feeding material---Roll forming---Hydraulic cutting---Pinching the T bar from roll forming machine to punching machine---Punching holes---Product collect table

Raw material:PPGI

Forming speed:0-25 m per minute

Forming stations:18 stations

Shaft material:45# steel with quenched treatment precision machined

outer diameter:40 mm

Voltage:380 v 50 hz 3 phase

Roller material:Cr12 with quenched treatment

Transmission type:By chains

Material of blades:Gcr12mov quenched

1.Two sets Manual Decoilers

a. Inner diameter: 450-550 mm  

b. Coil max width: 300 mm       

c. Max carrying capacity: 1500 kg

2.Entry Beach

Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. 

3.Roll Forming Machine

a. Number of forming steps: 18 stations

b. Shaft material: 45# steel with quenched treatment precision machined 

outer diameter: 40 mm

c. Roller material: Cr12 with quenched treatment

d. Transmission type: By chains

e. Drive motor power: 4kw  

f. Voltage: 380 v 50 hz 3 phase 

g. Forming speed: 0-25 m per minute  

h. Structure: Independent stand (cast steel)

4.Tracking Hydraulic cutting

Tamaño：3m*1m*0.6m 

Tipo de trabajo：Adopta acero soldado y rodillo soportado para transmitir los productos

5.Control Computer For Cutting

It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

Cutting type: servo tracking cutting

Servo motor power: 1.2 kw 

Power supply: 3 kw hydraulic power

Material of blades: Gcr12mov quenched

Components: It contains one set of cutting tools with one hydraulic tank and one cutter machine.

6.Punching System

Processing molds: 3 sets

Mould material: Skd 11 (Cr 12)

Servo motor power: 1.2 kw 

Power supply: 7.5 kw hydraulic power

Have logo pressing function

7.Hydraulic Station

Processing molds: 3 sets

Mould material: Skd 11 (Cr 12)

Servo motor power: 1.2 kw 

Power supply: 7.5 kw hydraulic power

Have logo pressing function

8.Electric Control System For Punching

Processing molds: 3 sets

Mould material: Skd 11 (Cr 12)

Servo motor power: 1.2 kw 

Power supply: 7.5 kw hydraulic power

Have logo pressing function